Filter
Top Products
5-4 Hardware Information
MA4000 Installation Manager User Guide - Revision 6
User ID and Password fields (optional)
The User ID and Password fields can be used if authentication is
required.
Test button
Clicking the Test button performs a verification of the system
connection selected. If the test connection fails, Figure 5-2 displays.
Figure 5-2
Test Connection - Login Failed
Setup IP... button
Clicking the Setup IP ... button allows the user to configure the IP
address, subnet mask, default gateway, speed, and duplex mode, if
applicable. The user identification/password can also be created. See
Figure 5-3 (SV7000 example) and Figure 5-4 (IPX example).
NOTE
The following options can only be used after the software has been successfully
installed and the system is online.
NOTE
If the Backup IP/Password Settings option is selected, Installation Manager will
back up the SV7000 after configuring the IP address and password.
For the IPX, the Backup IP/Password Setting is not available. Instead, there is a
Total PIMs (Physical +Virtual) field.
The IPX Installation Manager will automatically perform a System Backup and then
reset the Voice Server, after the IP address and password are configured.