Filter
Top Products
3-40 Graphical User Interface
MA4000 Installation Manager User Guide - Revision 6
Clipboard has been enhanced to be able to perform batch downloads.
You have the ability to:
• Download data from the switch based on categories (for example,
Station Data, Trunk Data, Restricted Data, etc.)
• Add commands the data needs to be download to a list that would be
run as a batch
process.
• Save selected commands in user template files for future access.
This enhancement lessens the work
needed when downloading data for
the same set of commands.
To launch Clipboard, do the following:
Step From Microsoft Desktop, select Start > Programs > Installation
Manager R24 > Clipboard.
OR
Step From the Installation Manager Menu Bar, click Tools > Clipboard.
Figure 3-45
MAT Clipboard
Network Manager...
The Network Manager is used to manage existing networks while using
Installation Manager to install and manage new networks.
The Network Manager application is intended to enhance the capabilities
already present within Installation Manager, but it does not require
Installation Manager in order to perform its task. Network Manager can
function in a stand-alone mode and has the capability of integrating
nodes into the Fusion (FCCS) Network whether or not the connecting
node was originally programmed using the MAT, the Installation
Clipboard application, or Installation Manager.
Use of this software is normally conducted as follows:
Step 1 Install NCN PBX using Installation Manager (optional).
Step 2 Install LCN PBX using Installation Manager (optional).
Step 3 Create FCCS Network using Network Manager (optional).
Step 4 Insert LCN node into existing FCCS Network using Network Manager.