Filter
Top Products
5-8 Hardware Information
MA4000 Installation Manager User Guide - Revision 6
Media Gateway and Circuit Cards
The Media Gateway and Circuit Cards (Figure 5-6) tab is where
peripheral devices (i.e, VS-32, MG-PRI, MG-COT, MC-2A), Protocol
Handlers, and Circuit Cards are assigned and configured. By default, all
of the required protocol handlers will be automatically assigned, no user
configuration is required.
Figure 5-6
Hardware Information - Media Gateway and Circuit Cards Tab
When installing a peripheral device, the MA4000 Installation Manager
will both configure the SV7000 and separately the peripheral device. To
configure a peripheral device, a serial cable is required to connect the
MA4000 Installation Manager PC to the device.
Figure 5-7
Female DB9 to Female DB9 Straight Through Cable example