Filter
Top Products
Wireless Configuration and Security
115
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Encryption
Note: WPA, WPA2, and
WPA+WPA2 only.
The encryption that you can select depends on the type of WPA security that
you have selected:
• WP
A. You can select the following encryption from the drop-down list:
- TKIP
- TKIP+CCMP
• WP
A2. You can select the following encryption from the drop-down list:
- CCMP
- TKIP+CCMP
• WP
A+WPA2. The encryption is TKIP+CCMP.
Authentication
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, specify the authentication by making a
sel
ection from the drop-down list:
• PSK
• RADIUS
• PSK+RADIUS
WPA Password
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only,
if you have selected PSK or
PSK+RADIUS authentication, enter a pre-shared key or password.
Enable
Pre
-Authentication
Note: WPA2 only.
For WPA2 only, if you have selected RADIUS authen
tication, configure
preauthentication by selecting the check box. Preauthentication allows a client
to roam from one access point to another access point without having to be
reauthenticated.
Radius Server Settings
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, if you have selected RADIUS or
PSK+RA
DIUS authentication, click the Radius Server Settings link to
configure the RADIUS settings (see RADIUS Client and Server Configuration
on page 235).
VLAN From the drop-down list, select the VLAN
to which the wireless profile should
be allocated.
VLAN Profiles Click the VLAN Profiles link to co
nfigure a VLAN profile (see Configure a
VLAN Profile o
n page 56).
Active Time To enable the timer, select the Active T
ime check box. When the timer is
enabled, the wireless profile is turned off from the start time until the stop time.
To disable the timer, clear the check box.
Start Time Specify the start hour in the Hours field and
the start minute in the Minutes field,
and then select AM or PM from the drop-down list.
Stop Time Specify the stop hour in the Hours field and th
e stop minute in the Minutes field,
and then select AM or PM from the drop-down list.
WLAN Partition To enable wireless client separation and prevent wireless clients that are
con
nected to this wireless profile from communicating with each other, select
the WLAN Partition check box. To disable wireless client separation, clear the
check box. By default, WLAN partition is disabled.
Table 28. Add Wireless Profiles screen settings (continued)
Setting Description