Filter
Top Products
Firewall Protection
154
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv4 LAN DMZ Inbound Service Rules
To create a new IPv4 LAN DMZ inbound rule:
1. In
the upper right of the LAN DMZ Rules screen, select the IPv4 radio button. The screen
displays the IPv4 settings (see Figure 73 on
page 150).
2. Click the Add t
able button under the Inbound Services table. The Add LAN DMZ Inbound
Service screen for IPv4 displays:
Figure 77.
3. Enter the settings as explained in Table 33 on page 132. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-do
wn lists:
• LAN Users
• DMZ Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake a selection from the following drop-down list:
• Select Sch
edule
4. Click Apply
to save your changes. The new rule is now added to the Inbound Services
table.
IPv6 LAN DMZ Inbound Service Rules
To create a new IPv6 LAN DMZ inbound rule:
1. In
the upper right of the LAN DMZ Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 74 on
page 151).