Filter
Top Products
Manage Users, Authentication, and VPN Certificates
298
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 181.
3. Enter the settings as explained in the following table:
4. Click Apply to
save your settings. The user is added to the List of Users table.
Table 73. Add Users screen settings
Setting Description
User Name A descriptive (alphanumeric) name of the user for identification and management
purposes.
User Type From the drop-down list, select one of the
predefined user types that determines the
access credentials:
• Ad
ministrator. User who has full access and the capacity to change the wireless
VPN firewall configuration (that is, read/write access).
• SSL VP
N User. User who can log in only to the SSL VPN portal.
• Guest User. User who can only view the wireless VPN firewall configuration (that is,
read-only access).
• IPSEC VPN User. A u
ser who can make an IPSec VPN connection only through a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled (see
Configure Extended Authentication (XAUTH) on p
age 233).
• L2
TP User. A user who can connect over an L2TP connection to an L2TP client that
is located behind the wireless VPN firewall.
Select Group The drop-down list shows the groups that are listed on
the Group screen. From the
drop-down list, select the group to which the user is assigned. For information about
how to configure groups, see Configure Groups on p
age 293.
Note: The user is assigned to the domain that is associated with the selected group.
Password The password that the user needs to enter to g
ain access to the wireless VPN firewall.
Confirm Password This field needs to be identical to the password that you entered in the Password field.
Idle Timeout The period after which an idle user is automaticall
y logged out of the web management
interface. The default idle time-out period is 5 minutes.