Filter
Top Products
Firewall Protection
144
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 68.
To make changes to an existing outbound or inbound service rule, in the Action column to the
right of to the rule, click one of the following table buttons:
• Up. Mo
ves the rule up one position in the table rank.
• Down.
Moves the rule down one position in the table rank.
• Edit. Allows you to make any cha
nges to the definition of an existing rule. Depending on
your selection, one of the following screens displays:
- Edit DMZ W
AN Outbound Service screen for IPv6 (identical to Figure 70 on
page 146)
- Edit DMZ W
AN Inbound Service screen for IPv6 (identical to Figure 72 on page 149)
To enable, disable, or delete one or more IPv4 or IPv6 rules:
1. select
the check box to the left of each rule that you want to enable, disable, or delete,
or click the Select All table button to select all rules.
2. Click one
of the following table buttons:
• Enable. En
ables the rule or rules. The ! status icon changes from a gray circle to a
green circle, indicating that the selected rule or rules are enabled. (By default, when a
rule is added to the table, it is automatically enabled.)
• Disable. Disables th
e rule or rules. The ! status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled.
• Delete. Deletes the sele
cted rule or rules.