Filter
Top Products
Firewall Protection
141
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Enter the settings as explained in Table 33 on page 132. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down
lists:
• W
AN Destination IP Address
• L
AN Users (This drop-down list is available only when the WAN mode is Classical
Routing. When the WAN mode is NAT, your network presents only one IP address to
the Internet.)
• W
AN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake selections from the following drop-down lists:
• Select
Schedule
• Sen
d to Lan Server
• Bandwid
th Profile
The following configuration is optional:
• T
ranslate to Port Number
4. Click App
ly to save your changes. The new rule is now added to the Inbound Services
table.
IPv6 LAN WAN Inbound Rules
To create a new IPv6 LAN WAN inbound rule:
1. In the upper
right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 62 on p
age 136).
2. Click the Ad
d table button under the Inbound Services table. The Add LAN WAN Inbound
Service screen for IPv6 displays:
Figure 66.