Filter
Top Products
Firewall Protection
153
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv6 LAN DMZ Outbound Service Rules
To create a new IPv6 LAN DMZ outbound rule:
1. In the upper
right of the LAN DMZ Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 74 on p
age 151).
2. Click the Ad
d table button under the Outbound Services table. The Add LAN DMZ
Outbound Service screen for IPv6 displays:
Figure 76.
3. Enter the settings as explained in Table 32 on page 128. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down
lists:
• LA
N Users
• DMZ Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake a selection from the following drop-down list:
• Select
Schedule
4. Click App
ly. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.