![](http://pdfasset.owneriq.net/7/2a/72a5d99f-af90-4997-bef7-f14ea2238c28/72a5d99f-af90-4997-bef7-f14ea2238c28-bg142.png)
Network and System Management
322
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note: The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both uppercase and
lowercase), numbers, and symbols. Your password can be up to
32 characters.
5. As
an option, you can change the idle time-out for an administrator login session. Enter a
new number of minutes in the Idle Timeout field. (The default setting is 5 minutes.)
6. Click Apply to save
your settings.
7. Repeat
Step 1 through Step 6 for the user with the name guest.
Note: After a factory defaults reset, the password and time-out value are
changed back to password and 5 minutes, respectively.
You can also change the administrator login policies:
• Disa
ble login. Deny login access.
Note: You obviously do not want to deny login access to yourself if you are
logged in as an administrator.
• Deny login access from a WAN interface. By default, the administrator cannot log in from
a WAN interface. You can change this setting to allow login access from a WAN interface.
• Deny
or allow login access from specific IP addresses. By default, the administrator can
log in from any IP address.
Note: For enhanced security, restrict access to as few external IP
addresses as practical.
• Deny or allow login access from specific browsers. By default, the administrator can log in
from any browser.
In general, these policy settings work well for an administrator
. However, you can change the
administrator login policies as explained in Set User Login Policies on p
age 299.
Configure Remote Management Access
An administrator can configure, upgrade, and check the status of the wireless VPN firewall
over the Internet through a Secure Sockets Layer (SSL) VPN connection.