Filter
Top Products
Wireless Configuration and Security
122
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
6. In the WPS Setup Method section of the screen, use one of the following methods to initiate
the WPS process for a wireless device:
• PIN meth
od:
a. Colle
ct the pin of the wireless device.
b. In the S
tation PIN field, enter the pin.
c. Click the
PIN button.
• Push
button configuration (PBC) method:
a. Click the
PBC button.
b. With
in 2 minutes, press the WPS button on your wireless device to enable the
device to connect the access point of the wireless VPN firewall, or follow the
WPS instructions that came with the device.
With either method, the wireless VPN firewall tries to communicate
with the wireless
device, set the wireless security for the wireless device, and allow it to join the wireless
network.
Note: There is no physical WPS push button on the wireless VPN firewall.
Configure Advanced Radio Settings
To configure advanced radio settings:
1. Select Netwo
rk Configuration > Wireless Settings > Radio Settings. The Radio
Settings screen displays (see Figure 52 on
page 105).
2. On
the Radio Settings screen, to the right of the Wireless Profiles tab, click the
Advanced option arrow. The Advanced Wireless screen displays:
Figure 59.