Filter
Top Products
Virtual Private Networking Using SSL Connections
271
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 165. SSL VPN Client screen for IPv6
3. Complete the settings as explained in the following table:
Table 67. SSL VPN Client screen settings for IPv4 and IPv6
Setting Description
Client IP Address Range
Enable Full Tunnel Support Select this check box to enable full-tunnel support. If you leave this check box
clea
red (which is the default setting), full-tunnel support is disabled but
split-tunnel support is enabled, and you need to add client routes (see Add
Routes for VPN Tunnel Clients on
page 272).
Note: When full-tunnel support is enabled, clien
t routes are not operable.
DNS Suffix A DNS suffix to be appended to incomplete DNS search strings. This setting
is option
al.
Primary DNS Server The IP address of the primary DNS server that is assigned to the VPN tunnel
clie
nts. This setting is optional.
Note: If you do not assign a DNS server, the DNS settings remain
unch
anged in the SSL VPN client after a VPN tunnel has been established.
Secondary DNS Server The IP address of the secondary DNS server that is
assigned to the VPN
tunnel clients. This setting is optional.