Filter
Top Products
Firewall Protection
139
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
IPv6 LAN WAN Outbound Rules
To create a new IPv6 LAN WAN outbound rule:
1. In the upper
right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 62 on p
age 136).
2. Click the Ad
d table button under the Outbound Services table. The Add LAN WAN
Outbound Service screen for IPv6 displays:
Figure 64.
3. Enter the settings as explained in Table 32 on page 128. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down
lists:
• LA
N Users
• W
AN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake a selection from the following drop-down lists:
• Select
Schedule
• QoS Priority
4. Click App
ly to save your changes. The new rule is now added to the Outbound Services
table.
Create LAN WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is