Filter
Top Products
Monitor System Access and Performance
340
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Enter the settings as explained in the following table:
Table 83. Firewall Logs & E-mail screen settings
Setting Description
Log Options
Log Identifier Enter the name of the log identifier. The identifier is appended to log messages to identify
the de
vice that sent the log messages. The default identifier is FVS318N.
Routing Logs
In the Accepted Packets and Dropped Packets columns, select check boxes
to specify which traffic is
logged:
• LAN to WAN
• LAN to DMZ
• DMZ to WAN
• WAN to LAN
• DMZ to LAN
• WAN to DMZ
System Logs Option
Select the check boxes to specify which system events are logged:
• Ch
ange of Time by NTP. Logs a message when the system time changes after a request from an NTP
server.
• Lo
gin Attempts. Logs a message when a login is attempted. Both successful and failed login attempts
are logged.
• Se
cure Login Attempts. Logs a message when a secure login is attempted. Both successful and failed
secure login attempts are logged.
• Re
boots. Logs a message when the wireless VPN firewall has been rebooted through the web
management interface. (No message is logged when the factory default Reset button has been pressed.)
• All Un
icast Traffic. All incoming unicast packets are logged.
• All Bro
adcast/Multicast Traffic. All incoming broadcast and multicast packets are logged.
• WA
N Status. WAN link status-related events are logged.
• Re
solved DNS Names. All resolved DNS names are logged.
• VPN. All
VPN negotiation messages are logged.
• DHC
P Server. All DHCP server events are logged.
Other Event Logs
Source MAC
Filter
Select this check box to log packets from MAC
addresses that match the source MAC
address filter settings.
Session Limit Select this check box to log packets that are dropped because the session limit has been
exce
eded.
Bandwidth
Limit
Select this check box to log packets that are dropped because the bandwidth limit has been
exceeded.