Filter
Top Products
Internet and Broadband Settings
38
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To automatically configure the WAN port for an IPv6 connection to the Internet:
1. Select Network Configuration > WAN Settings > Broadband ISP Settings.
2. In th
e upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings:
Figure 17.
3. In the Internet Address section of the screen, from the IPv6 drop-down list, select DHCPv6.
4. In th
e DHCPv6 section of the screen, select one of the following radio buttons:
• S
tateless Address Auto Configuration.
• S
tateful Address Auto Configuration.
5. As an opt
ional step: If you have selected the Stateless Address Auto Configuration radio
button, you can select the Prefix Delegation check box:
• Prefix del
egation check box is selected. A prefix is assigned by the ISP’s stateful
DHCPv6 server through prefix delegation. For example, 2001:db8:: /64. The wireless
VPN firewall’s stateless DHCPv6 server can assign this prefix to its IPv6 LAN clients.
For more information about prefix delegation, see Stateless DHCPv6 Server With
Prefix Delegation on p
age 71.
• Prefix del
egation check box is cleared. Prefix delegation is disabled. This is the
default setting.
6. Click Apply to
save your changes.