Filter
Top Products
Using the BayStack 450 10/100/1000 Series Switch
2-6
302401-D Rev 00
You can install the switch flush to the rack or extended from the rack,
depending on the orientation of the mounting brackets.
2.
Using a Phillips screwdriver, attach a mounting bracket to each side of
the switch using the supplied screws (Figure 2-3
).
Figure 2-3. Attaching Mounting Brackets
3.
Position the switch in the rack and align the holes in the mounting
bracket with the holes in the rack (see Figure 2-4
).
Figure 2-4. Installing the BayStack 450 Switch in an Equipment Rack
BS45036A
1 = Flush with rack
2 = Extended from rack
2
1
BS45037A
kombk.book Page 6 Tuesday, June 29, 1999 3:25 PM