Filter
Top Products
302401-D Rev 00
F-1
Appendix F
Default Settings
Table F-1 lists the factory default settings for the BayStack 450 switch.
Table F-1. Factory Default Settings for the BayStack 450 Switch
Field Default setting Appears in this CI screen
BootP Request Mode BootP Disabled IP Configuration/Setup (page 3-8)
In-Band Stack IP Address 0.0.0.0
(no IP address assigned)
In-Band Switch IP Address 0.0.0.0
(no IP address assigned)
In-Band Subnet Mask 0.0.0.0
(no subnet mask assigned)
Default Gateway 0.0.0.0
(no IP address assigned)
Read-Only Community String public SNMP Configuration (page 3-13
)
Read-Write Community String private
Trap IP Address 0.0.0.0
(no IP address assigned)
Community String Zero-length string
Authentication Trap Enabled
Link Up/Down Trap Enabled
sysContact Zero-length string System Characteristics (page 3-15
)
sysName Zero-length string
sysLocation Zero-length string
(continued)
kombk.book Page 1 Tuesday, June 29, 1999 3:25 PM