Using the BayStack 450 10/100/1000 Series Switch
3-4
302401-D Rev 00
Main Menu
This section describes the options available from the CI main menu (Figure 3-2).
The CI screens and submenus for these options are described in the following
sections.
Figure 3-2. Console Interface Main Menu
Note:
Some menu options shown in this main menu example and in other
screen examples in this chapter may not appear on your screen, depending on
the switch options installed. However, the full menu options are shown in the
screen examples and described in the following sections.
BayStack 450-24T Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Identify Unit Numbers
Renumber Stack Units...
Display Hardware Units...
Spanning Tree Configuration...
TELNET Configuration...
Software Download...
Configuration File...
Display Event Log
Reset
Reset to Default Settings
Logout
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
kombk.book Page 4 Tuesday, June 29, 1999 3:25 PM