Filter
Top Products
Default Settings
302401-D Rev 00
F-3
Unit 1 Port Configuration (page 3-32)
Status Enabled (for all ports)
Autonegotiation Enabled (for all ports
)
Speed/Duplex 100Mbs/Half (when
Autonegotiation is Disabled)
Unit 1 to 8 (depending on
configuration status)
High Speed Flow Control Configuration
(page 3-34
)
Autonegotiation Enabled
Flow Control Disabled
Note:
The following two fields only appear when a single Phy MDA with a separate redundant Phy port is
installed.
Preferred Phy Right
Active Phy Read-only field indicating the
operational Phy port (Right,
Left, or None)
Trunk Members (Unit/Port) Zero-length string MultiLink Trunk Configuration
(page 3-39
)
STP Learning Normal
Trunk Mode Basic
Trunk Status Enabled
Trunk Name Trunk #1 to Trunk #6
Traffic Type Rx and Tx MultiLink Trunk Utilization (page 3-41
)
Monitoring Mode Disabled Port Mirroring Configuration
(page 3-45)
Monitor/Unit Port Zero-length string
Unit/Port X Zero-length string
Unit/Port Y Zero-length string
Address A 00-00-00-00-00-00
(no MAC address assigned)
Address B 00-00-00-00-00-00
(no MAC address assigned)
(continued)
Table F-1. Factory Default Settings for the BayStack 450 Switch
(continued)
Field Default setting Appears in this CI screen
kombk.book Page 3 Tuesday, June 29, 1999 3:25 PM