Nortel Networks 450 Switch User Manual


 
BayStack 450 10/100/1000 Series Switches
302401-D Rev 00
1-37
VLANs Spanning Multiple Switches
You can use VLANs to segment a network within a switch. When connecting
multiple switches, it is possible to connect users of one VLAN with users of that
same VLAN in another switch. However, the configuration guidelines depend on
whether both switches support 802.1Q tagging.
With 802.1Q tagging enabled on a port for a VLAN, all frames leaving the port for
that VLAN are marked as belonging to that specific VLAN. You can assign
specific switch ports as members of one or more VLANs that span multiple
switches, without interfering with the spanning tree protocol.
VLANS Spanning Multiple 802.1Q Tagged Switches
Figure 1-21
shows VLANs spanning two BayStack 450 switches. The 802.1Q
tagging is enabled on S1, port 2 and on S2, port 1 for VLAN 1 and VLAN 2. Both
ports are tagged members of VLAN 1 and VLAN 2.
Figure 1-21. VLANs Spanning Multiple 802.1Q Tagged Switches
VLAN 1
S1
S2
VLAN 2
BayStack 450-24T
Both ports are tagged
members of VLAN 1
and VLAN 2
BayStack 450-24T
B45015A
kombk.book Page 37 Tuesday, June 29, 1999 3:25 PM