Filter
Top Products
Using the BayStack 450 10/100/1000 Series Switch
3-26
302401-D Rev 00
VLAN Port Configuration
The VLAN Port Configuration screen (Figure 3-10
) allows you to configure
specified switch ports with the appropriate PVID/VLAN association that enables
the creation of broadcast domains (see “
Shared Servers” on page 1-40 for more
information about setting up broadcast domains).
You can configure specified switch ports to filter (discard) all received tagged
frames, untagged frames, or unregistered frames (see “
IEEE 802.1Q Tagging” on
page 1-33
).
You can also prioritize the order in which the switch forwards packets, on a
per-port basis (see “
IEEE 802.1p Prioritizing” on page 1-53).
Choose VLAN Port Configuration (or press c) from the VLAN Configuration
Menu screen to open the VLAN Port Configuration screen.
The Port Membership fields are displayed in six-port groups (for example, 1-6, 7-12,
13-18). The number of ports displayed depends on the switch model or type of
optional MDA installed in the Uplink Module slot.
Default U (All ports are assigned as untagged members of VLAN 1.)
Range U, T, and -
Table 3-8. VLAN Configuration Screen Fields
(continued)
Field Description
kombk.book Page 26 Tuesday, June 29, 1999 3:25 PM