Filter
Top Products
Using the BayStack 450 10/100/1000 Series Switch
2-18
302401-D Rev 00
Figure 2-13. Main Menu
3.
Select IP Configuration/Setup (or press i) from the Main Menu.
This selection displays the IP Configuration/Setup screen (Figure 2-14
).
Note:
The IP interface of the BayStack 450 switch is only on VLAN 1.
You can manage the switch only from VLAN 1 (or via routers that connect
VLAN 1 to the network management station).
Note:
IP addresses are written as four decimal numbers (for example,
123.123.123.123). Each decimal number represents an 8-bit octet. When
strung together, the four octets form the 32-bit Internet address. This is called
dotted-decimal notation. The largest possible value of a field in a
dotted-decimal number is 255, which represents an octet of all ones.
BayStack 450-24T Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Display Hardware Units...
Spanning Tree Configuration...
TELNET Configuration...
Software Download...
Configuration File...
Display Event Log
Reset
Reset to Default Settings
Logout
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
kombk.book Page 18 Tuesday, June 29, 1999 3:25 PM