Nortel Networks 450 Switch User Manual


 
Index-2
302401-D Rev 00
configuration options, 3-5
configuration screen, 3-58
connecting to terminal, 2-11
illustration, E-5
pin assignments, E-5
conventions, text, xxiii
conversation steering, 1-16
cooling fans, 1-11
crossover cable, E-4
customer support, xxv
D
data communication equipment. See DCE
DB-9 connector, 2-10
DB-9 console/comm port connector, E-5
DCE, 2-10
Declaration of Conformity, A-4
Default Gateway field, 3-10
default settings, F-1
Deferred Packets field, 3-57
Designated Root field, 3-73
Display Event Log option, 3-6
Display Port Statistics option, 3-20
Display Spanning Tree Switch Settings option, 3-68
E
Event Log screen, 3-85
authentication failure, 3-86
event log flash memory, 3-86
excessive bad entries, 3-86
operational exception, 3-86
software download, 3-86
TELNET session status, 3-86
write threshold, 3-86
Event Logging field, 3-76
Excessive Collisions field, 3-57
F
FCS Errors field, 3-56
feet, chassis, 2-4
Filtered Packets field, 3-56
Find an Address field, 3-21
flash memory for software image upgrades, 1-15
flat surface, installing on, 2-4
Flooded Packets field, 3-56
Forward Delay field, 3-74
forwarding rate (packets per second), 1-11
Frame Errors field, 3-56
G
gateway address setting, 2-17, 2-20
Gigabit, B-1
MDAs, C-1
optical characteristics, B-1
grounding the switch, 2-3, 2-5
H
Hello Interval, 3-73, 3-74
Hello Time field, 3-73
I
IEEE 802.1p Prioritizing
feature, 1-14
IEEE 802.1Q Tagging
important terms, 1-33
IEEE 802.3u standard, 1-16
IGMP Snooping
configuration rules, 1-52
feature, 1-15
Image Filename field, 3-79
In Use field, 3-9
Inactivity Timeout field, 3-76
In-Band IP Address field, 3-9
In-Band Subnet Mask field, 3-9
Initial setup, 2-17
installation
chassis in a rack, 2-5
flat surface, 2-4
kombk.book Page 2 Tuesday, June 29, 1999 3:25 PM