Filter
Top Products
Installing the BayStack 450 Switch
302401-D Rev 00
2-23
6.
Enter the IP subnet mask address in the In-Band Subnet Mask field, then
press [Return].
7.
Enter the default gateway address in the Default Gateway field, then
press [Return].
See Chapter 3, “Using the Console Interface,” for detailed descriptions of the
menus and screens you can use to customize your configuration.
Note: IP addresses are written as four decimal numbers (for example,
123.123.123.123). Each decimal number represents an 8-bit octet. When
strung together, the four octets form the 32-bit Internet address. This is
called dotted-decimal notation. The largest possible value of a field in a
dotted-decimal number is 255, which represents an octet of all ones.
kombk.book Page 23 Tuesday, June 29, 1999 3:25 PM