Filter
Top Products
Using the Console Interface
302401-D Rev 00
3-75
TELNET Configuration
The TELNET Configuration screen (Figure 3-32) allows a user at a remote
console terminal to communicate with the BayStack 450 switch as if the console
terminal were directly connected to it. You can have up to four active TELNET
sessions at one time.
Choose TELNET Configuration (or press t) from the main menu to open the
TELNET Configuration screen.
Figure 3-32. TELNET Configuration Screen
Table 3-27 describes the TELNET Configuration screen fields.
TELNET Configuration
TELNET Access: [ Enabled ]
Login Timeout: [ 1 minute ]
Login Retries: [ 3 ]
Inactivity Timeout: [ 15 minutes ]
Event Logging: [ All ]
Allowed Source IP Address Allowed Source Mask
------------------------- -------------------------
[ 0.0.0.0 ] [ 0.0.0.0 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 75 Tuesday, June 29, 1999 3:25 PM