Filter
Top Products
16 Installation
3 Plug one end of the handset cord into the handset and
the other end into the jack on the front of the cradle.
Place the handset in the cradle.
4 Insert the supplied telephone cord into the jack located
on the back of the cradle.
5 Feed the telephone cord from the back of the cradle
through the cable run located on the back of the
OKIFAX
1 Using the supplied screw, connect the handset cradle to
its base.
2 Position the handset cradle on the left side of the
OKIFAX.
Feed cable here
Of5050hw.pm6 4/15/98, 9:31 AM16