Filter
Top Products
Faxing: Dial Directories 31
3 On the numeric keypad, press the # key. The display
shows GROUP SETTING.
4 Using the numeric keypad, enter the two-digit group
number you want to program. You can use numbers
from 01 to 10.
5 The display shows the number of your current group and
SELECT LOC.(S).
6 You can now add a location to your group (or delete a
location from it). Refer to the instructions below.
To Do This Use
Add a One Touch Press the One Touch key.
location Press Yes ᮤ to add it to the group.
Add an Auto Dial Press Auto Dial. Enter the 2-digit Auto location
Dial number. Press Yes ᮤ to add it to
the group.
Delete a previously Press the One Touch key. Press No
ᮣ
added
One Touch to delete it from the group.
location
Delete an Auto Dial Press the Auto Dial key. Enter the 2-digit
location Auto Dial number. Press No
ᮣ
to delete
it from the group.
Search for a location Press the Search key continuously until by name
to add or delete the location you want appears. Press
Yes ᮤ to add it to the group.
Press No
ᮣ
to delete it.
7 After you have completed your selection by pressing Yes ᮤ
or No
ᮣ
, the display shows SELECT LOC. again. Continue
to add or delete locations from your group. Each group can
contain up to a maximum of all of the One Touch and Auto
Dial locations available on your OKIFAX.
8 When you are finished programming your group, press the
No
ᮣ
key. The display shows LOCATION PROGRAM-
MING.
9 To program another group, go back to Step 3.
If you are finished, press the Select Function key.
Of5050hw.pm6 4/15/98, 9:32 AM31