Filter
Top Products
MATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEETMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET
OL "e" Series Toner
MSDS # 58093101
For more information, contact Okidata at:
532 Fellowship Road
Mount Laurel, NJ 08054
Emergency Information: 1-800-OKIDATA
Emergency First Aid Procedures
Emergency Procedure
Toner swallowed Dilute by giving two glasses of
(ingested). water and induce vomiting by
administering Syrup of Ipecac
(follow manufacturer’s instruc
tions). Seek medical attention.
NEVER give anything by mouth
or attempt to induce vomiting
in a person who is unconscious.
Toner inhaled. Remove person to fresh air.
Seek medical attention.
Toner gets in Flush eyes with large quantities
the eyes. of cool water for 15 minutes,
keeping the eyelids open with
fingers. Seek medical attention.
NoteNote
NoteNote
Note: Small amounts of toner on skin or clothing can
easily be removed with soap and cold water. Hot water
makes toner harder to remove.
Hazardous Ingredients
Styrene-Butyl Acrylate Copolymer (91% by weight)
CAS# 25767-47-9
OSHA TWA 15 mg/m
3
for total dust
ACGIH TLV 10 mg/m
3
for total dust
Carbon Black (5-7% by weight)
CAS# 1333-86-4
OSHA TWA 3.5 mg/m
3
ACGIH TLV 3.5 mg/m
3
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m
3
for total dust
ACGIH TLV 10 mg/m
3
for total dust
Amorphous Fumed Silica (less than 1% by weight)
CAS# 67762-90-7
OSHA PEL 15.0 mg/m
3
for total dust
ACGIH TLV 10.0 mg/m
3
for total dust
NoteNote
NoteNote
Note
: :
: :
: This product is not regulated under Section 313 of
SARA, Title III.
Physical Data
Melting Point: 110°C (230°F)
Boiling Point: Not applicable
Vapor Pressure: Not applicable
Of5050hw.pm6 4/15/98, 9:45 AM84