Filter
Top Products
26
|
Handbook
FUNCTION NO. [ ].
4 Using the numeric keypad, enter 14. This display shows
USER LANGUAGE.
5 Press the No ᮣ key to switch to the other installed
language.
6 To accept the language change, press the Yes ᮤ key.
7 Press the Select Function key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone
system used to route internal calls. If you have to dial a prefix
(access) number to get an outside line, then your line is
connected to a PBX.
To connect your MFP to a PBX, follow the instructions
below. These settings allow your MFP to identify your PBX’s
access digit at the beginning of phone numbers you dial or
program, and automatically wait for a dial tone before dialing
the rest of the number.
!
Some PBX installations may require additional
adjustments to your MFP. If you have difficulty with fax
communication after following these steps, contact
Okidata.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4 Press the Yes ᮤ key until the display shows
PBX LINE, [OFF].
5 Press the No ᮣ key. The display changes to
PBX LINE, [ON].
6 Press the Yes ᮤ key until the display shows
DIAL PREFIX, [OFF].
7 Press the No ᮣ key. The display changes to
DIAL PREFIX, [ ] ENTER 4 DIGITS.
8 Using the numeric keypad, enter the number you
normally dial from your PBX to obtain an outside line,
for example, 9 1-555-1212.