Filter
Top Products
32
|
Handbook
• When loading multiple-page documents, do not load
paper that is thinner than 0.003″ (0.08 mm) or thicker than
0.005″ (0.13 mm).
• For single documents, do not load paper that is thinner
than 0.002″ (0.06 mm) or thicker than 0.006″ (0.15 mm).
Loading Documents
To prevent paper jams and problems during operation:
• Stack your documents neatly.
• Align document edges before loading.
• Don’t load different size documents at the same time.
!
You can load and prepare to transmit a document while
your MFP is still sending or receiving another message
(as long as the document feeder is clear). To do this,
load the document, select your location and press the
Start key. Your document will be sent when the current
communication ends.
1 Adjust the document guides to the width of the paper you
are using.
2 Neatly stack your documents, then insert them face down
into the document feeder. Readjust the document guides
for a snug fit.