Filter
Top Products
62
|
Handbook
from the document feeder). Available settings are memory
and Feeder.
18 Not assigned.
19 ECM FUNCTION: The error correction mode function
helps your MFP to improve communication in areas
where telephone line conditions are poor. Available
settings are on and off.
20 REMOTE DIAGNOSIS: The remote diagnostics feature
allows a service person to remotely dial and service your
MFP. Available settings are on and off.
21 PC/FAX SWITCH: If this function is set to on, your MFP
automatically transfers received faxes directly to the PC
(and does not receive and print them itself). However, if
you are experiencing a problem with your PC, you can set
your MFP to receive and print faxes locally by changing
the AUTO REC mode from PC MODE to AUTO REC.
Available settings are on and off. If your PC is switched
off, and this setting is set on, the fax will be received and
printed automatically. If your PC is switched off, and this
setting is set off, the call will not be answered.
22 NO TONER MEM RX: With this function turned on,
your MFP will automatically receive and store messages
in its memory when it is low on toner. When turned off,
messages will print even if toner is low or empty.
Available settings are on and off.
23 MEM FULL SAVE: With Broadcast Transmission and
other functions, call origination starts after an entire
document is read into memory. If during this process,
memory becomes full and an “operator time out” seems
likely, a message to that effect is shown in the Display
Panel if this MEM FULL save function is on. If it is off,
data that could not be read into memory is automatically
deleted. Available settings are on and off.
24 CONTINUOUS TONE: With this function on, you can
choose whether to have a warning tone sound when
receiving a transmission. Pressing the STOP key turns off
the tone. Set this function to off for no warning sound.
Available settings are on and off.
25 INSTANT DIALING: Set this function to start reading
documents upon call origination when transmitting.
Available settings are on and off.