Filter
Top Products
70
|
Handbook
Codes Used in Reports
Result Codes
Result codes indicate the results of communications.
Code Description
BUSY The other machine’s line was busy or there
was no answer.
CANCL A message was erased after being held in
memory for 10 days.
COMP. A multiple-location transmission was
completed.
COVER The cover was opened during the
communication.
NO The transmission or reception failed due to
a communication error.
OK The communication was completed
successfully.
PUNIT This error code indicates a problem with
the printing unit.
Contact your service person.
R_JAM A paper jam occurred in your MFP while it
was receiving a fax, and it was unable to
receive the entire message in memory.
S_JAM A document jam occurred in the
sending fax machine.
STOP The Stop key was pressed, ending
the communication session.
Communication Codes
These codes indicate the communication mode was used for a
communication.
Code Description
B.C. Multiple-location transmission
(broadcast).
CALLING A communication initiated by
your MFP.
CALLED A communication initiated by a
remote fax machine.