Handbook
|
63
26 RESTRICT ACCESS: Select whether or not you want
restricted access. Turning on this function renders your
restricted ID registration active. Available settings are on
and off.
27 WIDTH REDUCTION: Turning this function on enables
you to print received data that exceeds the printable area
of the page by slightly reducing the received data.
Available settings are on and off.
28 ONE TOUCH PARAM: This function allows you to
make changes to the communications settings for a
specific One Touch key, without changing the normal
communication settings used by your MFP. For
instructions on changing One Touch Parameters settings
for a One Touch key, see “Programming Your One Touch
Directory.”
Changing Your User Function Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display
shows 1:FUNC. PROGRAMMING.
3 Press the Yes ᮤ key. The display shows FUNCTION NO. [ ].
4 Using the numeric keypad, enter the 2-digit number of
the function you want to change. This display shows the
name of the selected function.
5 Repeatedly press the No ᮣ key until the setting you
want appears in the display.
!
If you are changing your MFP’s TX MODE DEFAULT
settings, the new settings appear on the LEDs above the
Transmit Resolution/Yes and the Type of Original/No
keys
6 Press the Yes ᮤ key to confirm your selection. The name
of the next function setting appears in the display.
7 Press the Select Function key to finish.