Oki 84 Printer User Manual


 
Handbook
|
59
Overview
Customizing
Features and
Operations
Many of your MFP’s features and functions have settings,
which can be changed to customize its operation. Because
each country has different regulations, you may not be able
to access all of the settings listed in this chapter. If you have
trouble changing a setting, contact your dealer for assistance
or call Okidata customer service at 1-800-OKIDATA (800-
654-3282).
Viewing Your Current Settings
Follow these instructions to obtain a configuration report
showing the current settings
.
1 Press the Select Function key.
2 Press the 6/Report Print One Touch key. The display
shows 1:ACTIVITY REPORT.
3 Using the numeric keypad, press 5. The display shows
5:CONFIGURATION.
4 Press the Yes key. The report begins printing.
User Function Settings
User function settings allow you to customize the general
operation of your MFP. Refer to User Function Settings List
to determine which settings you may need to change, then
refer to “Changing Your User Function Settings” to make the
change.
Note: The Factory Default setting is in bold italics.
User Function Settings List
1 MCF (SINGLE-LOC.): This function automatically
prints a Message Confirmation Report after each single-
location transmission or polling transmission. Available
settings are on and off.
2 MCF (MULTI-LOC.): This function automatically prints
a Message Confirmation Report after each multiple-
location transmission. Available settings are on and off.
3 ERR REPORT (MCF): This function automatically
prints a Message Confirmation Report each time an error
occurs during a transmission or polling transmission
operation. Available settings are on and off.