66
|
Handbook
Changing Your Dial Parameter Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4 Press the Yes ᮤ key until the display shows the dial
parameter
MH ONLY: This function controls the type of
compression method your MFP uses during
communication. Available settings are on and off.
H/MODEM RATE: This function controls the
communications speed your MFP’s modem uses at the
beginning of a fax communication. Available settings are
14.4K, 9.6K and 4.8K.