Filter
Top Products
399
7-2-6 4-digit Hex/Decimal Display Change
This operation converts data displays from normal or signed 4-digit hexadecimal
data to decimal and vice versa.
Decimal values from 0 to 65,535 are valid when inputting normal 4-digit hexade-
cimal data, and decimal values from –32,768 to +32,767 are valid when inputting
signed 4-digit hexadecimal data.
Key Sequence
Single word or
3-word monitor
currently displayed.
TR
(NOT switches between
normal and signed data.)
[New data]
Clear new input data.
Specifies positive
signed data.
Specifies negative
signed data.
TR
cL01D000000001
CFC7 1234R OFF
cL01
Ć12345
cL01
53191
cL01
Ć12345
PRES VAL?
cL01Ć12345
Monitor the desired word.
(Leftmost word in 3-word monitor.)
TR
Press SHIFT and TR to change the
display to signed decimal.
Press NOT to switch back and forth
between signed and normal data.
PRES VAL?
cL01+12345
PRES VAL?
cL01+32767
cL01
+32767
cL01D000000001
7FFF 1234R OFF
TR
Press SHIFT and TR to change the
display back to hexadecimal.
Press CHG to change the content of the
displayed word.
Press PLAY/SET to specify positive
signed data.
Input the new value.
Press WRITE to enter the new data to
memory.
Example
Programming Console Operations Section 7-2