Filter
Top Products
Appendix BProgramming Instructions
522
Code PageFunctionNameMnemonic
--- (@)RXD RECEIVE Receives data via a communications port. 329
--- (@)SBBL DOUBLE BINARY
SUBTRACT
Subtracts an 8-digit binary value (normal or signed data)
from another and outputs the result to R and R+1.
251
--- (@)SCL SCALING Performs a scaling conversion on the calculated value. 222
--- (@)SRCH DATA SEARCH Searches the specified range of memory for the speci-
fied data. Outputs the word address(es) of words in the
range that contain the data.
314
--- (@)STUP CHANGE RS-232C SETUP Changes the PC Setup settings for the specified port. 333
--- (@)SUM SUM CALCULATE Computes the sum of the contents of the words in the
specified range of memory.
261
--- (@)TKY TEN KEY INPUT Inputs 8 digits of BCD data from a 10-key keypad. 346
--- (@)TXD TRANSMIT Sends data via a communications port. 331
--- (@)XDMR EXPANSION DM READ The contents of the designated number of words of the
fixed expansion DM data are read and output to the
destination word on the PC side.
315
--- (@)XFR2 EM BLOCK TRANSFER Moves content of several consecutive source words to
consecutive destination words. Words in the any valid
EM bank can be specified for the source or destination.
This instruction can be used to change the current bank.
190
--- ZCPL DOUBLE AREA RANGE
COMPARE
Compares an 8-digit value to a range defined by lower
and upper limits and outputs the result to the GR, EQ,
and LE flags.
201