Omron C200HX Computer Hardware User Manual


 
Appendix AStandard Models
511
Name Stan-
dards
Model numberSpecifications
Optical Fiber Cable Connector
SYSMAC NET:
S3200-LSU03-01E
B700-AL001
C500-SNT31-V4
Full-lock con-
nector for NSU,
NSB, and C500
SYSMAC NET
Link Unit
S3200-COCH62M ---
SYSMAC BUS:
C200H-RM001-PV1
C200H-RT001/RT002-P
C500-RM001-(P)V1
C500-RT001/RT002-(P)V1
3G2A9-jjj(-P)
Half-lock con-
nector for Re-
mote I/O Mas-
ter, Remote I/O
Slave, Host Link
Unit, and Link
Adapter
S3200-COCH82
SYSMAC NET/SYSMAC LINK
C200HS-SNT32
C200HW-SLK13/14
Half-lock con-
nector
S3200-COCF2511
SYSMAC NET/SYSMAC LINK
CV500-SNT31
CV500-SLK11
CV1000H-SLK11
Full-lock con-
nector
S3200-COCF2011
To relay at all SYSMAC NET COCF62M and
S3200-COCF62M
nodes. COCF62F are
used as a pair.
S3200-COCF62F
Note: 1. Optical fiber cables must be prepared and connected by specialists.
2. If the user prepares and connects optical fiber cables, the user must take a seminar held under the aus-
pices of Sumitomo Electric Industries, Ltd. and obtain a proper certificate.
3. The Optical Power Tester, Head Unit, Master Fiber Set, and Optical Fiber Assembling Tool are required to
connect optical fiber cables.
4. You may want to use the Plastic Clad Optical Fiber Cable/All Plastic Optical Fiber Cable with connectors
listed on the previous two pages.
Optical Fiber Assembling Tool
Name Specifications Model number Stan-
dards
Optical Fiber Assembling Tool Used to connect H-PCF and crimp-cut connectors
for optical transmission systems such as the SYS-
MAC C- and CV-series SYSMAC BUS, SYSMAC
LINK and SYSMAC NET.
S3200-CAK1062 ---
Note: 1. Optical fiber cables must be prepared and connected by specialists.
2. The Optical Power Tester, Head Unit, Master Fiber set, and Optical Fiber Assembling Tool are required to
connect optical fiber cables.