Filter
Top Products
COMMUNICATION
EATON Powerware
®
9315 UPS (500–750 kVA) Installation and Operation Manual S 164201244 Rev E www.powerware.com
12-13
12.5.8 Modify Low Battery Time
If Modify Low Battery Time (option 6) is selected from the Main menu (see
page 12-9), the following menu is displayed:
Modify Low Battery Time
Low Battery Time (Minutes): 004
Enter New Low Battery Time:
<CR> to return with no change.
NOTE Low Battery Time should be no greater than 999.
To change the Low Battery Time warning level, enter a new time.
12.6 Calibration Mode
Calibration mode is used by factory and field service personnel to calibrate system
meters. Factory test engineers calibrate the UPS meters prior to shipping so the UPS
arrives at your site correctly calibrated. After use, field service personnel may need to
use Calibration mode to recalibrate one or more meter settings.
NOTE Calibration mode is for use by service personnel ONLY. To prevent inadvertent modification, this
mode can be accessed only by trained personnel.
12.7 Computer Mode
Computer mode provides a computer interface which gives your system compatibility
with system monitoring and network products. For a list of products available, contact
your Eaton sales representative.
12.8 Remote Monitor Mode
Remote Monitor mode provides the interface for the RMP, RIM, or SCM described
earlier. Port 1 operates by default in Remote Monitor mode.