Filter
Top Products
Chapter 6 Novell Host Configuration
158
3. At the “Administration Configuration” HTML form that displays,
highlight the field beside the “Name” heading and type in the
new name of the print server.
4. Click Submit when done and physically repower the printer to
make the new setting take effect.
Novell Host Configuration
ADAPTER,
WLAN
ADAPTER
Under all versions of NetWare, both PSERVER and RPRINTER
setups are supported by the NIC. Since a PSERVER setup is the
most common, you will find the necessary steps to configure the
NIC as a PSERVER shown first. Configuration for RPRINTER and
NPRINTER setup follow the PSERVER information.
NOTE: The NIC can service up to four printers on one file server. It
cannot service multiple file servers at one time.
NetWare Version 3.
x
PSERVER Setup
To configure a print queue on a NetWare 3.
x
network:
1. Log on to the Novell file server as supervisor.
2. Enter PCONSOLE.
3. Select “Print Queue Information” from the PCONSOLE Main
Menu.
4. Click INSERT to add a new queue to the list of currently
defined queues showing.
5. Type in the name of this new queue when prompted and press
ENTER. This can be any name you would like.
6. Press ESCAPE to return to the Main Menu.
7. Select “Print Server Information” and press ENTER.
8. Click INSERT when the list of existing print servers displays.