Filter
Top Products
Chapter 7 Novell NIC Configuration (10/100Base-T)
182
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password, type in
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the NIC IP address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell mode [nds | bindery | auto]
4. Reset the unit to make the changes take effect:
reset
Setting The NIC NDS Context (NDS Setups)
The NIC allows you to store the print server object in any context
within the NDS tree you choose. By default the NIC will look for the
print server object in the same context as the file server object it
connects to is stored in.
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://NICIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a User ID and password, type in
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the Novell section and enter the new context in the
NDS Context field.
4. Click SUBMIT when done and physically repower the printer to
make the new settings take effect.