Filter
Top Products
Chapter 16 NIC Security
346
8. Wait about 1 minute for the adapter to reboot after the reset
command.
9. Turn the printer off, wait 15 seconds, and turn the printer back
on. Wait 1 minute for the adapter to boot.
10. Telnet back into the adapter, logging in as root with no
password, and pressing Enter.
Procedure B
1. Turn the printer off.
2. Flip dip switch 2 down on the NIC adapter.
3. Turn the printer on, and wait about 1 minute for the adapter to
boot.
4. Telenet to the adapter.
5. Login as root and press Enter for the password.
6. Flip dip switch 2 up.
7. Type the following at the telnet prompt:
set user passwd root
save
reset
8. Wait about 1 minute for the adapter to reboot after the reset
command.
9. Turn the printer off, wait 15 seconds, and turn the printer back
on. Wait 1 minute for the adapter to boot.
10. Telnet back into the adapter, logging in as root with no
password, and pressing Enter.