Filter
Top Products
Setting The NIC Preferred NDS Tree (NDS Setups)
183
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password, type in
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the NIC IP address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell context context
4. Reset the unit to make the changes take effect:
reset
Setting The NIC Preferred NDS Tree
(NDS Setups)
The NIC supports Novell environments that have multiple trees. If
your environment has more than one tree you may want to set a
preferred tree. By default, the NIC will try to log in to each tree it
finds until it is successful.
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://NICIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a User ID and password, type in
root
for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the Novell section and enter the preferred tree in
the NDS Preferred Tree field.
4. Click SUBMIT when done and physically repower the printer to
make the new settings take effect.