Filter
Top Products
NDPS Configuration (Netware 4.11 And Above)
193
5. Select no driver in the Select Printer Drivers dialog, unless you
have a driver installed into the Broker's RMS which is to be
used with the printer.
Setup Using RPRINTER Mode
In this mode, an NDPS printer agent receives jobs from an NDPS
client, then forwards these jobs to a printer using the RPRINTER
IPX protocol.
1. The printer must first be set up to function in RPRINTER mode,
selecting any desired Print Server Name and Printer Number.
2. Use Novell Printer Gateway when setting up the NDPS printer
agent.
3. Select ((NONE)) for Novell PDS.
4. Select Remote (rprinter on IPX) for Port Handler.
5. Enter the Print Server Name and Printer Number from step 1
for the SAP Name.
6. Select no drivers in the Select Printer Drivers dialog unless you
have a driver installed into the Broker's RMS which is to be
used with the printer.
The printer will need to be rebooted to attach to the NDPS printer
agent in this mode.