Filter
Top Products
Configuration Menus 4–55
SPC Coax Params
*
= Factory default
SPC Coax
Params
Logical Buf Size
Image Buf
f Size
Buf
fer Print
Column 132
Wrap
PA1
Intervention
Reg
Simp Prot Conv
Buf
fer Reprint
PA2
1920*
960
2560
3440
3564
4K*
2K
Send to Host*
Do Not Send
Disable*
Enable
Disable*
Enable
T
ranslation Tbl
Logical Buff Size
Refers to the size of the printer buffer which should be set the same as the host
screen (buffer) size. If the host screen size is unknown, use 1920.
Image Buff Size
This option refers to the printer base buffer size. This size must be set to a value
greater than or equal to the Logical Buffer Size.
Intervention Reg
Select
SEND T
O HOST to have the printer send a signal to the host whenever
any of the following events occur:
1. The printer faults.
2. HOLD Mode Time–Out
3. CANCEL PRINT key is pressed.