Filter
Top Products
2–16 Setting Up the Printer
Interface Connections
Pedestal Model
Cabinet Model
Network 10Base2 Network 10BaseT
Coax / Twinax
Data Products Longlines
Centronics
1
Auxiliary
I/O
Serial
RS232/RS422
Centronics
1
Auxiliary I/O
Diagnostic
Serial
RS232/RS422
1
Not present on Network models
Diagnostic
90° BNC
connector required for Coax
connection with the Power Stacker
.
Optional
Interfaces for Auxiliary I/O
Data
Products Standard Adapter
1. Remove the cover from the I/O connector you have selected.
2. Attach the I/O cable connector to the printer interface connector.