Filter
Top Products
Configuration Menus 4–31
Power Up ^X
Enable selects the ignore mode as the power–up default, and selects the
graphics mode ^PY as the power–up default. All characters are ignored until a ^A
command is received.
Power Up ^F
Enable selects free format as the power–up default, and selects the graphics
mode ^PY as the power–up default. Free format causes the VGL to ignore
carriage returns, line feeds and all characters below 20 hex sent from the host.
Power Up PY
Enable selects the graphics mode ^PY as the power–up default.
LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6–inch from the top of one print line to the top of the next print line.
Graphics Options
Following are several options that configure printing output.
Slash 0
This parameter allows you to print the numeral ‘0’ with or without the slash. This
option applies to all character sets except OCR–A and OCR–B.
• Disable. Zero is printed without a slash.
• Enable. Zero is printed with a slash.
Ignore Dots
Enable causes the VGL to expect position values to be specified in only 1/10ths
of an inch. If the dot position is also given, it is treated as text.