Filter
Top Products
Configuration Menus 4–79
Epson FX
Define CR Code
The Define CR Code option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this feature is enabled,
each time the printer receives a Carriage Return, it inserts an additional Line
Feed code (hex 0A) into the data stream. Do not use this feature if the host
computer sends Line Feeds to the printer.
• CR = CR does not insert an extra Line Feed after each Carriage Return.
• CR = CR + LF inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the forms
width setting.
• Enable performs an automatic carriage return and line feed when data
is received past the forms width.
• Disable discards any data past the forms width.
Define LF Code
The Define LF Code option controls the action of the printer when it receives a
Line Feed code (0A hex) from the host computer. If this feature is enabled, each
time the printer receives a Line Feed, it inserts an additional Carriage Return
code (0D hex) into the data stream. This feature is required if the host computer
does not send Carriage Returns to the printer.
• LF = LF does not add a Carriage Return with a Line Feed.
• LF = CR + LF adds an extra Carriage Return with each Line Feed.
Printer Select
This option determines if the ASCII DC1 and DC3 control codes can be used to
disable and enable the printer.
• Disable ignores the DC1 and DC3 control codes.
• Enable disables the printer when a DC1 control code is received, and
enables the printer when a DC3 control code is received.