Filter
Top Products
4–32 Configuration Menus
Append Rotated
Enable appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation. Otherwise, the logo is treated as a
separate element.
Truncate Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off Page
Error) if alphanumeric data, including spaces, extends beyond the right side of the form.
T
rue V
ert 1/10
Determines if a vertical 1/10 of an inch parameter is used as 1/10 of an inch
(Enabled) or as 7/72 of an inch (Disabled). When used as 1/10 of an inch,
rounding will occur to the nearest 1/72 of an inch. This can cause vertical moves
that have the same value to differ by 1/72 of an inch. When used as 7/72 of an
inch, the absolute move is slightly smaller than expected. For example, a one
inch move would be 70/72 of an inch. Vertical moves that have the same value
will be identical in length.
Absorb after ^PY
Absorb motion prevents paper motion following a system terminator in a graphics
^PY command. When absorb all is selected, the system ignores all the data and
terminator until a host generated terminator is detected. When disabled, system
terminators following a graphics command are sent to the printer and result in
paper motion.
UPC Descenders
This parameter allows you to print bar code descenders for human readable data
in the UPC/EAN bar codes.
• Disable. UPC/EAN bar codes are printed without descenders if there is
no human readable data.
• Enable. UPC/EAN bar codes are printed with descenders, even if there
is no human readable data.