Filter
Top Products
4–116 Configuration Menus
DIAGNOSTICS Menu
Diagnostics
(From
4–13)
On: X.X hrs
Print: X.X Hrs
Print Strokes
Print Lines
1
1 inch Pages
Printer T
ests T
est Width
Paper Out Dots
System Memory
Print Statistics
Full Width *
80 col.
40 dots *
4–76
X Megabytes
* = Factory default
Shift Recycle*
All E’
s
E’
s and T
OF
All H’
s
All Underlines
All Black
Shuttle Slow
Shuttle Fast
Shuttle Only
Phase Printer
1 to 2000
217 (500 lpm)*
123 (800/900 lpm)*
82 (1200/1400 lpm)*
Paperout Adj.
Burnin T
est Print Error Log
Clear Error Log
E–net T
est Page
1
1
If
Ethernet adapter is present.
Printer Tests
The printer tests are used to check the print quality and operation of your printer.
NOTE: Your authorized service representative will typically run these tests.
They are described in more detail in the
Maintenance Manual.
• Shift Recycle – A sliding alphanumeric pattern that identifies missing or
malformed characters, improper vertical alignment, or vertical
compression.
•
All E’
s – A pattern of all uppercase E’s that identifies missing
characters, misplaced dots, smeared characters, improper phasing
problems, or light/dark character variations.
• E’s plus TOF – A pattern of all E’s followed by a form feed to the next
page top–of–form, that identifies paper motion or feeding problems.
• All H’s – A pattern of all uppercase H’s used to detect missing
characters, misplaced dots, smeared characters, or improper phasing.